1/2hp 40 Inch Wood Turning Lathe of 4-Speed Power 14×40 In

via

[avia_codeblock_placeholder uid="2"]

1/2hp 40 Inch Wood Turning Lathe of 4-Speed Power 14×40 In

Buy On Amazon

This lathe presents a machine tool that rotates a block of wooden material to attain many functions like sanding, cutting, drilling, knurling or deformation. It does this with devices that are set on the workpiece to form an object that is balanced.

It is usual practice with wood to press the sandpaper and slide it against the object while it is still spinning, after shaping to make the exterior smooth.

Specifications

Single Phase motor power of 350 Watts

Cutting tool height of 7 inches or 178 mm.

Optimal diameter of 14-1/4” or 365 mm

Cutting feed’s maximum length is 39-1/4 or 1000 mm

Voltage of 120 Volt

Frequency 60 Hz

This model consists of 4 speeds which are fixed internally, roughing off – 1100 RPM, general cutting, 1600 RPM, excellent cutting, 2300 RPM and finishing, 3400 RPM.

Features

The turning capacity of this wood lathe is 14 inches optimal diameter over the bed, and the maximum between centers is 40 inches. The wood lathe pulley system consists of V belts and presents four speeds.

The spindle speeds range between 810 RPM to 3400 RPM. The motor is 350 watt, 110 volt AC; 1400 RPM mounted to the headstock. The general size is 14.57 inches high and width of 9.45 inches while the length is 59.05 inches.

More Outstanding Features

This woodworking lathe presents a heavy duty tool whose design is meant to knurl, sand, drill, and cut to form the item you want. Technical features are inclusive of 350 W motor, a single-phase, 60 Hz Frequency, 4 speeds and 120 V Voltage.

For people who are just starting, it is also appropriate due to its flexibility and durability. Its massive weight will hold it firmly for an accurate job. You can use this model without any problem, and it comes with some useful instructions that you can follow.

You can set the four speeds internally and utilize them depending on what you intend to do with the piece of wood. To rough off, you can use 1600 RPM, 1100 RPM and 2300 RPM for excellent cutting.

This lathe comes with the belt on minimum speed, the motor is loosely mounted, and you should loosen the two bolts to raise tension.

To adjust the speed, you should open the box then unscrew the motor for you to raise it up and shift the belt. After using it a few times, you shall become very used to its mechanism, and it will function immediately. You are advised to study the instruction manual so that you can use it easily and fast.

Reviews

If you are looking for a highly recommended product with discount price and superior quality, the 1/2 HP Power wood turning lathe of 4-Speed is an excellent option for you.

Many positive reviews are present about this wood lathe whose numerous features make it an ideal product. The commentaries offer you a strong indication of how reliable this product is.

Choosing the appropriate wood lathe

A wood lathe differs from carving tools as you can utilize any of them on numerous projects. You should first decide why you require the cutter. You need to establish the kinds of projects you will use the tool on. You should also consider the available work area, speed, accessories, and size.

Kind of Project

Your first consideration should be the kind of project before buying a wood lathe. Usually, two major types of wood lathe exist. The first is the light duty for objects like candle holders which are small. For projects that are big like table legs and baseball bats, you require a more significant wood lathe.

Decide whether you will expand afterward after your skills improve or whether you will only specialize in the small objects. The smaller lathe has restrictions regarding expansion.

Your Work Area

The quantity of available space shall establish the kind of wood lathe you choose. Lathe sizes are provided at all times for you to decide the amount of space you require. A standard cutter has 16” x 42” in size. It signifies the lathe can work with wood that is 75” wide and 48” long. Think of these dimensions before you select a lathe.

Size

Do not believe people who insist that the ideal equipment is compact portable equipment. Where lathes are concerned, bigger cutters are better; this is in consideration of other elements like budget and floor size. You can turn big and small projects with a small lathe. It is not advisable to use smaller lathes as your central woodworking equipment. Avoid restricting yourself.

Mode of Speed

The speed functions either electronically or manually. Lathes with electronic speeds offer you a range of choices, unlike manual lathes. The manufacturer limits manual lathes’ to only a few speeds. The two work efficiently; however, electronic offers you many options where speed is concerned.

Electronic is more efficient also as it offers finer speed alterations, ensuring that you do not damage your wooden pieces.

Accessories

It is advisable to always choose machines with regular accessories. A lathe that consists of standard tapers and spindle threads offer an option for growth in future. Your skills are going to improve and it is vital to avoid restricting yourself to options for a range of faceplates and chunks.

The above points are suitable when you are searching for a lathe which will cater to your requirements. Whether you are purchasing a tool for business or a hobby, it is essential for you to acquire the necessary knowledge to handle a wood lathe and know the feature you need to look for.

Conclusion

Woodturning lathes are a variety that has been around for ages. A modifiable horizontal metal rail (tool rest) between the operator and material accommodates positioning of designing tools that you usually hold by hand.

With wood, it is normal to press and move sandpaper against the object that is still spinning after designing to smoothen the surface created with the metal designing tools.

Review Table

1/2hp 40 Inch Wood Turning Lathe of 4-Speed Power 14×40 In

Learn More

Recommended For You

0 Comments

December 27, 2017

1/2hp 40 Inch Wood Turning Lathe of 4-Speed Power 14×40 In

aplaceforusblog.com/wp-content/uploads/2017/12/12hp-40-In…
667
1000

rxHAVcWSmedS49j

aplaceforusblog.com/wp-content/uploads/2017/03/A-Place-fo…

rxHAVcWSmedS49j2017-12-27 09:21:422017-12-21 17:23:531/2hp 40 Inch Wood Turning Lathe of 4-Speed Power 14×40 In

0 Comments